You can now Download DXF Files. NOTE: Most files are ZIPPED. They contain one or more DXF files that can be IMPORTED into most CAD software. They can then be modified, and printed ..... Thanks Joe . . . . .
( NOT-EZ Canard )--- This is a design I have been playing around with. I have yet to make a Canard " Rutan " type airplane, but I would like to. My biggest problem is the ( CG ). I am gathering information on this subject and will post it ASAP.
Model Spec's
Wingspan ------------- 48"
Length ----------------- 27.25"
Power ------------------ 40 size
| ( BLUEBIRD ) ---- I built control line models before but this was one of the first R/C models that I designed and scratch built. It was a little heavy, but with a Fox 40 in the nose it flew quite well. The only problem with the design was the use of Clark Y, flat bottom airfoil. I changed this to a better airfoil which makes it a better sports plane.
Model Spec's
| 
|  |
| ( BOSS-HOG ) ---- This is the plan of my oversized "piggy". Building it was simular to the original except that I used a lot of ply in the Fuselage. One other note, I made a alumium one piece landing gear and mounted it in the wing center-forward on a plywood plate. I attached this with 1/4 in. nylon bolts. The original Hog had wire gears mounted out in the wings.
Model Spec's | 
|  |
|
( EMERAUDE ) ---- This is a design I came up with for the French homebuilt Emeraude. This was also an 80 inch bird that was a healthy 19 lbs. I modified a Kioritz "Weed Wacker" engine of 21 cc, and installed it in the nose. The plane was underpowered for it's size, but it flew very scale-like. You had to build up airspeed before you could loop or roll.
Model Spec's | 
| 
|
| ( EZ-ED ) ---- I needed a plane that I could take with me when I go traveling, it had to be small enough to store in a small space. I also wanted to be able to hand launch it (no wheels). All this and I wanted it to be aerobatic, With a OS 15 FP ? -- you bet! Don't let anyone tell you that you should have at least a 40 size plane to have fun. These little fellows are a blast!
Model Spec's | 
| 
|
| ( SKY-MASTER ) ---- I have always liked the Sky Master so I drew this up, and put it together. It flew fair but I never had the chance to get it's full potential, it's life ended when I went flying with my antenna down, hey I'm not perfect! Another dumb thing was not taking a photo.
Model Spec's
| 
|  |
( GRUNT ) ---- I need a Test Bed for a bunch of converted gas engines that I have yet to try out, Another Kioritz, a Homelite 35, and a Ryobi 32. I wanted a plane that is simple, no cowl, strong, with the ease of conversion. I think that this design will work, we will see!
Model Spec's
Wingspan ------------- 80"
Length ----------------- 54"
Power ------------------ ???
Weight ----------------- light
| ( WTF-225 ) ---- This is the first of the WTF Twins, ( see the story in the TWIN PAGE ). I have really been happy with this design and
I hope to scale it up to 60 size engines in the future.
Model Spec's
| 
|  |
| ( WTF-240 ) ---- This is the second of the WTF Twins,( see the story in the TWIN PAGE ). This size is more stable, and has more authority, could be the increase in dihedral. The 60 size is next!
Model Spec's
| 
| 
|
| ( WILDONE ) ---- Another Twin yet to be built! I like this one because it would be easy to adapt retracts. Down load the DXF file and have a look.
Model Spec's
| 
|
| ( BIGONE ) ---- I kind of like this big bird, haven't build it yet but I like it. I don't think it would be much in the aerobatic department, but it would look good just flying around.
Model Spec's
| 
|
| ( ELECT-J ) ---- I tried a Factory Kit for an Electric Trainer but it seemed heavy and over built. I thought I would try my own design. This is what I came up with. It has light weight construction and a lot of wing area with ailerons (no rudder) Weighs in at 42 oz. compaired to 50 oz for the kit. The rascal flys great, good climb, throttle back and enjoy long flights, It's a winner Folks! Let me know if you put one together.
Model Spec's
| 
| 
| 
|
| ( LIGHT DUTY ) ---- Here is a variation of the ELECT "J", A low wing model built even lighter. Added a Master Airscrew Reduction gear for the first trials. I intend to go with a direct drive motor in other test.
Model Spec's
| 
|
| ( CAP 10B) A nicely detailed plan designed by Carl Layden email --- laydenc@nbnet.nb.ca. ----------------------------------------------
Model Spec's | 
|
| ( CAP-10BMM) Improved version of the Carl Layden design With the prototype picture. Highly detailed DXF file sent in by Carl Layden email --- laydenc@nbnet.nb.ca
Model Spec's | 
| 
|
| ( AMP ) This a Al Eastman electric design supplied by www.rcland.net. The picture was sent in by Ronald Whisenhunt, Scratch built from these plans, nice job Ron!
Model Spec's | 
| 
|
| ( Modified SEAMASTER 40 ) Light Weight Modified Seamaster design by Glenn Morris, with building notes -- email -- flyboy2@email.msn.com ------------------
Model Spec's | 
| 
| 
|
| ( SCHOOL YARD BIPE ) 1/2 A Biplane, a great school yard flier designed by Glenn Morris -- email -- flyboy2@email.msn.com -----
Model Spec's | 
| 
|
| ( The SAUCER ) Richard C. Bradford
supplied this Great control line drawing. For More information contact Richard at --- rcbav@mindspring.com
| 
|
| ( RD346B ) This Is a Nice Bipe Designed by Ron Graham. It's not complete yet, but I was just curious to see if there was any interest in this size and type of project. The plane has a 75" w.s., an overall length of 77" set up for a 5.0 cu.in. twin. e-mail ----
airrds1@cwix.com
Model Spec's | 
|
| ( MOONRACE )Here are a model airplane Sent in by Gérard Palardy That he digitalised from a old magazine.(Flying Models nov. 1985) It is a very fast machine powered by a OS .61 with pump and tuned pipe.
Model Spec's | 
|
| ( BGILES ) Aeronautical engineering student Erez Ravivh designed this rendition of the Giles g-202. It is a very clean and fast, but with the stability to fly slow. You can contact Erez e-mail ---- erezraviv@hotmail.com
Model Spec's | 
|
| ( EASTWIND II ) This Twin electric designed by Al Eastman and sent in by Eddy Matthews. Should be interesting to the electric builder.
Model Spec's | 
|
| ( GULL) is a nice detailed Chuck Griffith design sent in by Chuck e-mail -- evey@xprs.net Check it out! ...................
Model Spec's | 
|
| ( TWIN ) Just plain Twin! designed by Dan e-mail --- DSimp60380@aol.com ----------------------------------------------------------------------------------
Model Spec's | 
|
| ( TIME MACHINE ) Nice Sport plane! designed by Dan e-mail --- DSimp60380@aol.com -------------------------------------------------------------------
Model Spec's | 
|
| ( BIPLANE ) nice little Bipe is a Matthew Francis design. Matt says it is loosely based on a Stearman, but is not meant to be a scale model of anything.
Model Spec's | 
|
| ( BUZZ BOMB ) a little sport flier which is surprizingly fast and agile even on a .049! designed by Matthew Francis for the 1/2A crowd
Model Spec's | 
|
| ( BIG FLYING WING ) designed by William Schwartz it has a converted Horton Flying Wing airfoil. You can check out Bills Web SiteHERE
Model Spec's | 
|
| ( AEROSPORT ) designed by Jason Sanders an easy to build 1/2 A. He says it flys great! -----------------------------------------------------------
Model Spec's | 
|
| ( SUPER SINBAD ) Is a highly detailed William Kaminsky drawing of a Berkeley kit glider. E-mail coosbaylumberco@yahoo.com
Model Spec's | 
|
| ( BINARY ) Binary is a design sent in by Howard Wiersma, she is a 1/2A twin designed around the Norvel .074 engines.
Model Spec's | 
|
| ( BOBCAT ) is another good 1/2A design sent in by Howard Wiersma, It has a Norvel .074 engine. -------------------------------------------------------
Model Spec's | 
|
| ( KAOS 15 ) Highly detailed engine powered alternative of Joe Joplings electric Kaos, He says it is a winner!
Model Spec's | 
|  |
| ( INSOMNIAC ) Here is a neat little plane Chris Samoila designed one night when he had trouble sleeping (hence the name). It flies great and is easy to build. He said the plan has been offered on the net before by others and many have been built all over the world.
Model Spec's | 
|
| ( ULTIMATE BIPE ) Designed by John Anders a sport rubber powered biplane based loosely on the full size ultimate bipe. He says it is large enough to be a good flyer and is a lot of fun. It has quite a few flights on it and it thermals with ease.
Model Spec's | 
|
| ( SKY SQUIRE ) The 1/2 A Sky Squire is a highly detailed 1969 Jess Krieser design redrawn and modified by Richard Browning. If you build one, email Richard at RICHARD3851@JUNO.COM.
Model Spec's | 
| 
|
| ( SKIONN ) The Skionn is a highly detailed Glider design drawn by koosha Sina. --------------------------------------------
Model Spec's | 
|
| ( ALEX) Is a nicely drawn design of a sport plane sent in by a fellow named Alex. Thanks Alex. --------------------------------------------
Model Spec's | 
|
| ( MODEL I-224) Is a nicely drawn design with many views. This sport plane sent in by a fellow named Alex. Thanks Alex. --------------------------------------------
Model Spec's | 
|
| ( WESTERN SLOPE QUEEN ) This is a highly detailed 4 drawing Glider design drawn by Paul Kenney, a retired Aerospace engineer. Look this one over people! -------------------------------------------
Model Spec's | 
|
| ( INSIGHT ) The Insight is a highly detailed three page drawing by Mark Hunt. It is for all you Pattern Plane lovers. Check it out folks!
Model Spec's | 
| 
|
| ( INSIGHT V2 ) The new version of Insight is a highly detailed three page drawing and photos by Mark Hunt.
Model Spec's | 
| 
|
|
| ( HOTSTUFF II ) The Hotstuff II is a Great design by Steve Brown, The file includes detailed drawings and construction pictures.
Model Spec's | 
|
| ( HOTSTUFF III ) The Steve Brown Hotstuff III has design changes of the Hotstuff II , The file includes detailed drawings and construction pictures.
Model Spec's |
|
| ( KWIK-FLI MARK III ) Richard Browning sent in this Phil Kraft Model that he had redrawn in CAD format. If anyone builds this one give Richard an email and let him know how it goes. Richard3851@juno.com
Model Spec's | 
|
| ( GREAT WHITE 40 ) . Thanks go to Richard C. Bradford and his 60's Stunter, who inspired me to start working with my CAD program.
Model Spec's | 
|
| ( THUNDERBIRD ) It is a highly detailed design sent in by John Anders. I wonder if it is as fast as it looks ? Nice job John.
Model Spec's | 
| 
|
| ( FLOATS ) Brian Parke sent in these 40 size float plans, They look like they would be very easy to build.
Model Spec's | 
|
| ( HB1 ) The HB1 is a Low Wing Big Bird sent in by Rob van der Heijden
one of our friends from the Netherlands.
Model Spec's | 
|
| ( UGLY STICK 60) Jason Niemier redrew this original Phil Kraft & Guy Fuller design Ugly Stick. It is highly detailed with an all new wing and airfoil that is bolt on. Many of the parts redrawn accurately so you can actuly build it and it's to scale too.
Model Spec's | 
|
| ( MIRACLE ) Sent in by Frank Manders and he says this is a Simple plane to build, and with a .46OS it has more then enough power. A good .32 to .40 will do fine also. Check it out!
Model Spec's | 
|